Highland Park South Roof Replacement

What is the best option of roofing material to use? Is it asphalt shingle or metal roof? House owners, engineers, contractors and designers all have a different point of views in selecting the right roofing system for homes in Highland Park South.

Because of this a roofer can be difficult to find. Nevertheless, our roofing expert will assist the property owner regardless of any program. Each of these individuals will have a various agenda and reasoning for choosing particular products.

exactly how roofing felt is made

Roof Repairs For an Emergency

Asphalt shingles are proven, commonly utilized and accepted as a great option. House buyers feel safe using shingles as roofing materials from their contractors. The most significant selling point of asphalt shingles (aside from its reputation) is the price.

They have a low cost and high-end choices. Entry level or production real estate can utilize the basic three tab shingle. Although, individuals with a bigger budget plan can ask our their contractor about designer shingles.

Roof Repairs For an Emergency

Most roofing experts use asphalt shingles due to the fact that they are the common choice and have been broad used for a very long time. Nevertheless, metal roofs are ending up being more extensively utilized also throughout the area.

There’s a lot of design choices which varies from elegant to fundamental. Shingles normally include a 20-30 year guarantee, and a great deal of them are fire-rated also.

Considering that metal roofs are not as commonly utilized here yet, they can appear severe. In the minds of many people, metal is utilized for barns and warehouses.

that makes finest roofing tiles

They are easy to repair and deal with. Other types of roofs can be managed by our roofers.

6 Warning Signs Your Roof Needs Repair Or Replacement That You Can't Afford to Ignore

Metal roofs use to have problems with corrosion. Now, our Highland Park South contractors can describe that current ones are made with specialized resin paints which can endure salt spray, extreme heat, and heavy rainfall that we typically see in the area.

Roof valleys are a frequent source of leaks in older houses. Installation procedures differ depending on the roof type and materials used. We will look here at the basic installation of an open lead lined roof valley. A roof valley is basically a gutter set between two meeting pitched roofs. Depending on the roof area it serves, the valley is the exit point for a large volume of water so extreme care should be taken with installation. If the roof has been leaking for a while or if there are any signs of rot, you will need to start by replacing the valley boards. Lead sheet is not self supporting and should be placed on treated roofing boards of sufficient strength to hold a large person. Fit boards of sufficient width to accommodate the lead plus 100mm either side. This will give you something to nail the roofing batons to.The top of the valley boards should be at the same level as the top of the roof rafters.


If you lay the boards directly on top of the rafters it may cause the roofing tiles to kick up and restrict water run off. You will need to cut the valley boards to fit in between the rafters. Support the valley boards with studs or noggins. The valley should finish on an even plane at the eaves. It should not kick up higher than the bottom rafters. If it does, you will need to cut the fascia board or adjust the gutter to suit. It is a good idea to fit a tilting fillet each side of the valley. This angled strip of wood runs along the valley length and should be a minimum of 150mm from the center of the valley. It should sit no higher than the roofing batons with the thinnest end closest to the center of the valley.It is common practice to fit a single sheet of roofing underlay the entire length of the valley. The adjacent roofing underlay will rest on top of this sheet. I recommend you use one of the new advanced synthetic underlay materials. The older bitumen based felts are fine for normal roofing situations but are not suitable for valleys. Over time the bitumen will bond the lead to the boards and restrict thermal movement.


You should ensure you buy lead of a sufficient grade/code for valley applications. This should be between 1.80mm and 2.24mm thickness. If you are unsure ask your roofing merchant of the correct grade. The lead should be cut into sections no larger than 1.5 meters in length to allow sufficient thermal movement. Bend a welt into the lead 25mm each side. This acts as a last line of defence for water penetration. It also has the added benefit of stiffening the lead, which makes carrying it up the roof a lot easier.Starting at the bottom of the valley, dress the lead neatly onto the valley boards and over the tilting fillets. The bottom of the lead should allow correct drainage into the gutter. Fix two rows of nails at the very top of the flashing. Use copper or stainless steel nails. Never use galvanised or aluminum nails which will just react with the lead and corrode.


I recommend you use the minimum amount of fixing possible to hold the lead in place. If you over fix lead sheeting it will eventually split due to thermal movement. So don't nail the sides. When you have successfully dressed the first sheet you can move up the roof laying subsequent sheets. Overlap each sheet a minimum of 150mm. On lower pitched roof valleys you will need to increase the lap. Where the valley ends at the ridge, you will need to dress the lead so it can sit neatly under the ridge tiles. You are now ready to start fixing the batons and laying the roofing tiles. The key points to remember are to keep the sheet lengths down to 1.5 meters and don't over fix. If you follow the procedure outlined and take care with the dressing you will produce a durable maintenance free valley.

Utilizing metal roofing for your home means helping nature too. Did you know that steel is 100% recyclable? You won’t see any metal roofs thrown away in a landfill. Professionals can explain how they assist you conserve more energy too.

There are a lot of choices of metal roof, and roofing contractor who will you know what and who to pick? Our experts will assist you in selecting which is appropriate for your home. Your choices variety from traditional metal roofing to high-end roof materials. Shingles are inexpensive, however overall the advantages fall short when compared with metal roof.

There is no question EPDM roofing membrane is amazing to work with. It is affordable, it can be installed in very little time, and it is long lasting. This is a great opportunity for you to have some prevention in place and to get results. Yet there are mistakes that people need to avoid to get the most value from it. Everyone is busy, but you shouldn't put off installing EPDM roofing membrane. Don't wait until you have a roofing issue or notice a water leak. The damages are already done, and they often go much further than what you can see. This can mean your structure is vulnerable and future problems due to that downward spiral.Instead, put the EPDM roofing membrane in place as a source of prevention. This will offer you an additional layer of protection you can count on.


The harsh weather including the high-speed winds aren't going to get you nervous. Instead, you will be confident to know your roof it going to be in good shape when all is said and done. While you can get plenty of overall value from EPDM roofing membrane, it doesn't work like magic. You have to invest the time to properly inspect and prep your roof to take care of any problems already in place. Don't ignore them and just hope for the best or you will end up having to get the work done anyway. Yet you also wasted those materials.


Any loose elements of debris need to be brushed off the roof. You can't put the materials down flat if there are any materials that will cause it to be raised anywhere. Even small pebbles that could have blown up there can pose a problem. The protection offered by the EPDM roofing membrane can be reduced if you don't have good edge flashing in place.


If you don't know how to take care of this type of work on your own, it is important to hire someone to come take a look and give you an estimate. It needs to be done well with quality results.A common mistake made is the edge flashing is placed on top of the new rubber and then secured in place with nails or glue. The correct method is for it to be placed underneath the EPDM roofing membrane. This allows the rubber to extend about an inch off the roof, towards the gutters. Never secure the materials in place if you see any signs of wrinkles.


For the optimum results, the materials need to be smooth and flat. Any wrinkles are going to reduce the lifespan and the protection the materials are able to offer. This is especially true if those wrinkles happen to be anywhere close to the edges of the rubber. You have the option of using nails or glue to secure the materials in place. If you use nails, make sure they are designed for this type of material. You also want to make sure they are long enough to hold the materials in place. If they are too short, it isn't going to offer much security.


If you opt to use glue, make sure you get a quality product approved for such a project or it won't stay.The bonding process does take some time, so it is a good idea to use bricks or other items to press down on the materials. Allow them to sit there the rest of the day before you remove them. Double check all of the seams and fix anything you may have missed.

Roofing Company, Roof Contractor, Roof Replacement, Roofer, Roof Installation, Roofing Contractors, Roofing Services, Residential Roofing, Roofers, Roofing Contractor, Roofing